After a fire, the water is often the bigger problem: hose lines and sprinklers soak drywall, insulation and subfloors that stay wet behind the char. In Los Angeles, call Los Angeles Water Damage at (213) 463-5333 for fire and water damage cleanup, so extraction and drying start before mold and soot residue set in.
The fire is out, but the building is still taking damage. Every gallon the fire department put on the structure went somewhere: down wall cavities, into attic insulation, through floors into the unit or room below. That water sits against framing, and it does its own damage on a different timeline than the fire did.
If you are standing in a Los Angeles property that burned, start with a short list for the first call: which rooms burned, which rooms only got wet, whether power is off, and whether anyone has told you the structure is safe to enter. Call (213) 463-5333 and give that list to Los Angeles Water Damage.
What does firefighting water leave behind?
It leaves saturated materials that look fine on the surface. Drywall under a scorched ceiling may be dry to the touch while the insulation above it holds water. Carpet pad, hardwood and subfloor soak up runoff from the floor above and keep it long after the standing water is gone.
Fire water also carries ash and soot, so it is not clean water. Ask any contractor how they treat wet materials that were exposed to it, because that affects what can be dried in place and what has to come out.
Which comes first, drying or soot cleanup?
Moisture usually comes first, because it keeps spreading while soot just sits. Pulling water out and getting air moving through the structure limits the secondary damage, and smoke-stained surfaces can be cleaned once the building is no longer wet.
Do not wipe soot with a damp rag in the meantime. It smears into porous surfaces and makes the stain harder to lift.
What should you document before cleanup begins?
Photograph every room, wet and burned, before anything is moved or discarded. Keep a list of what was removed and why. Your insurance adjuster will want both, and a written scope from the restoration company helps tie each line item to the loss.
- Photos of each room and the ceiling above it
- The fire department incident report number, if you were given one
- Receipts for anything you buy or board up in the meantime
Can I stay in the house while fire and water cleanup happens?
That depends on whether the building has been cleared for entry and whether power and gas are safe. Ask the fire department and your restoration contractor before you move back in, since wet materials and soot residue can affect air quality.
Do I need to call my insurance company first?
Notify your insurer promptly, but you do not need to wait for an adjuster before limiting further damage. Take photos first, then get water extraction and drying started and keep the records.
Will the smell go away after the water is dried?
Drying alone does not remove smoke odor, because smoke particles settle on surfaces and into porous materials. Ask what the plan is for odor after the structure is dry.